Early Access  -  Black Friday Bundle  -  80% Off Buy now
Drivers

Why Does My Mouse Keep Freezing, Lagging or Disconnecting?

Why your mouse keeps freezing, and how to fix it: batteries, USB, Bluetooth and drivers.

By WinZip Team|Published

Check your drivers in one scan. WinZip System Utilities Suite's Driver Updater finds outdated drivers so you can update them.

Download Now For Windows 11 and 10
A computer mouse half covered in ice on a mouse pad, with a red disconnected signal above it

Quick Answer

A mouse that keeps freezing, lagging or disconnecting usually has low batteries, a weak link to its USB receiver or Bluetooth, a USB port that Windows turns off to save power, or an outdated driver. To find and fix the cause:

  1. Charge the mouse or put in fresh batteries, then turn it off and on again.
  2. Plug the cable or USB receiver straight into a different USB port on the PC, not a hub, and move it closer to the mouse.
  3. Stop USB power saving: right-click Start > Device Manager > Universal Serial Bus controllers, open each USB Root Hub > Power Management and clear Allow the computer to turn off this device to save power.
  4. Bluetooth mouse: remove it in Settings > Bluetooth & devices > Devices, then pair it again.
  5. Update the driver: in Device Manager, right-click your mouse under Mice and other pointing devices > Update driver.

How you know it worked: the pointer moves smoothly and stays connected through a full day of normal use.

If your mouse keeps freezing, lagging or disconnecting, the cause is usually simple to find and fix with tools built into Windows 11 and 10. Sometimes the mouse itself is wearing out: section 7 shows how to tell.

Is it the mouse or the whole PC? If the pointer stops but the keyboard and your apps still respond, it's the mouse or its connection. If everything stops, your computer is freezing: see Why Does My Computer Keep Freezing?

1. Quick Checks to Try First

Back to guide

  1. Charge it or change the batteries. Low batteries are a common cause of lag and lost connections.
  2. Turn the mouse off, wait a few seconds and turn it back on.
  3. Unplug it and plug it back in. For a wireless mouse, unplug the USB receiver, wait about 10 seconds and plug it back in.
  4. Try a different USB port, not a hub. Plug the cable or receiver straight into the PC, not into a USB hub, extender or switch.
  5. Unplug USB devices you don't need. Conflicts with other USB devices can make the cursor stop responding.
  6. Clean the sensor and check the surface. Turn the mouse off and clean the sensor with compressed air or a slightly damp cotton swab. Avoid glass, mirror-like, single-color and metal surfaces: a mouse pad with a texture or printed pattern works best.
  7. Restart your PC. Microsoft notes a restart refreshes drivers after recent updates.

Expected result: the pointer moves smoothly again. If a wired mouse only works properly in some ports, update your PC's USB chipset driver (section 5).

2. Mouse Keeps Disconnecting and Reconnecting? Check the Receiver

Back to guide

A wireless mouse that cuts out and comes back is usually losing its signal to the receiver.

  1. Bring the mouse and receiver closer. The computer case can block the signal, so if the receiver is in the back of a desktop PC, move it to a front port.
  2. Clear the area around the receiver. Keep other electrical devices at least 8 inches (20 cm) away. Wireless speakers, power supplies, monitors and cell phones can all interfere.
  3. Pair it again if you moved the receiver. Moving the receiver to another port can break the connection. Pair them again with the maker's app or instructions.
  4. Update the mouse's firmware if the maker's app offers an update.

A wired mouse that drops out: check the cable for damage, try another port, then turn off USB power saving (section 3).

Expected result: the mouse stays connected and no longer stalls when you move it.

3. Stop Windows Turning Off Your USB Mouse to Save Power

Back to guide

Windows can turn off USB ports to save power, which can make a mouse drop out or fail to wake. To stop it:

  1. Right-click Start and select Device Manager.
  2. Expand Universal Serial Bus controllers. Right-click a USB Root Hub, select Properties and open the Power Management tab.
  3. Clear Allow the computer to turn off this device to save power and select OK. Repeat for every USB Root Hub, then for each USB Input Device under Human Interface Devices. Skip any without a Power Management tab.
  4. Restart your PC.

Turn off USB selective suspend too. Select Start, type Edit power plan and open it. Select Change advanced power settings, expand USB settings > USB selective suspend setting, set every option under it to Disabled and select OK. If USB settings isn't listed, skip this step.

Expected result: the mouse no longer drops out or fails to wake after your PC sleeps. Dell notes that turning off power saving may slightly reduce a laptop's battery life, so turn it back on if it doesn't help.

4. Bluetooth Mouse Lagging or Disconnecting

Back to guide

A short pause when you pick up a Bluetooth mouse after a break can be normal: Microsoft notes its Surface Bluetooth mice sleep after 8 to 10 minutes of inactivity to save battery and can take several seconds to reconnect. If it drops out while you're using it:

  1. Check the basics. Make sure the mouse is on, charged or has fresh batteries, and is in range of your PC.
  2. Turn Bluetooth off and on. On Windows 11, select Start > Settings > Bluetooth & devices, turn Bluetooth off, wait a few seconds and turn it back on. On Windows 10, it's under Settings > Devices > Bluetooth & other devices.
  3. Remove the mouse and pair it again. On Windows 11, go to Settings > Bluetooth & devices > Devices, select More options next to the mouse, then Remove device > Yes. Put the mouse in pairing mode, select the Network, Sound or Battery icon on the taskbar > Manage Bluetooth devices and choose the mouse under New devices. On Windows 10, use Remove device, then Add Bluetooth or other device > Bluetooth.
  4. Turn off power saving. Select the battery icon on the taskbar and turn off Energy Saver (Windows 11) or Battery saver (Windows 10). Then in Device Manager, expand Bluetooth, right-click your Bluetooth adapter, select Properties > Power Management and clear Allow the computer to turn off this device to save power.
  5. Cut interference. Keep the mouse away from devices plugged into USB 3.0 ports, which can interfere with Bluetooth, and disconnect Bluetooth devices you aren't using: Microsoft notes too many at once can interfere too.
  6. Run the troubleshooter. On Windows 11, go to Settings > System > Troubleshoot > Other troubleshooters and select Run next to Bluetooth. On Windows 10, it's under Settings > Update & Security > Troubleshoot.

Expected result: the mouse shows as connected under Bluetooth & devices and stays connected. If Bluetooth itself keeps failing, see 5 Simple Steps to Fix Bluetooth Issues.

5. Update or Reinstall Your Mouse, USB and Bluetooth Drivers

Back to guide

Dell notes that a corrupted driver can make the pointer disappear, and that outdated or corrupted Bluetooth drivers can stop mouse buttons responding.

  1. Check Windows Update. On Windows 11, select Start > Settings > Windows Update > Advanced options > Optional updates. Select any driver updates and choose Download and install: optional drivers aren't installed automatically. On Windows 10, go to Settings > Update & Security > Windows Update, select Check for updates, then View optional updates if it appears.
  2. Update the mouse driver. Right-click Start > Device Manager, expand Mice and other pointing devices, right-click your mouse and choose Update driver > Search automatically for updated driver software. For a Bluetooth mouse, do the same for the adapter under Bluetooth.
  3. Get chipset, USB and Bluetooth drivers from your PC or laptop maker's support site if Windows doesn't find anything.
  4. Reinstall the mouse driver. Save your work and close your apps. In Device Manager, right-click the mouse, select Uninstall device and confirm with Uninstall. Restart, and Windows reinstalls the driver.
  5. Did it start after an update? Roll the driver back: right-click the mouse in Device Manager > Properties > Driver > Roll Back Driver, choose a reason and select Yes.

No pointer at all? Press the Windows key, type Device Manager and press Enter. Use the arrow keys to move and expand categories, and Shift + F10 for the right-click menu. More in How to Update Drivers in Windows 11 and 10.

Expected result: Device Manager shows your mouse with no warning icon, and the freezing stops.

6. Why Is My Mouse Stuttering or Lagging in Windows 11?

Back to guide

Mouse stuttering usually comes from the connection (sections 2 and 4) or from Windows being busy. Also try:

  • Close apps you aren't using. Microsoft notes that having many apps open can interfere with your PC's connection to the mouse. Press Ctrl + Shift + Esc to open Task Manager if you need to end one.
  • Let Windows Update finish. Updates running in the background can cause delays. Restart if Windows asks you to.
  • Check the pointer settings. Go to Start > Settings > Bluetooth & devices > Mouse, adjust Mouse pointer speed and try Enhance pointer precision on and off. On Windows 10, go to Settings > Devices > Mouse; the precision setting is under Additional mouse options > Pointer Options.
  • Jumps or jitters rather than lag? A dirty or cracked sensor lens can make the pointer jitter, and the mouse's firmware or the surface can make it jump. Clean the sensor, use a patterned mouse pad and check the maker's app for a firmware update.

Expected result: the pointer follows your hand without pauses or jumps, even with other apps open.

7. Is Your Mouse Failing? How to Tell

Back to guide

  1. Plug the mouse into another PC. If it fails there too, Microsoft says you might need to replace it. Some mice need their own driver or app, so install it first.
  2. Try a different mouse on your PC. If that one works fine in the same port, your mouse is the problem. If it freezes too, the cause is on your PC (sections 3 and 5).
  3. Test the buttons and wheel. Our free mouse test shows which buttons work, spots a mouse that double clicks by itself and checks the scroll wheel.

Expected result: you know whether to keep troubleshooting your PC or replace the mouse (contact its maker if it's under warranty).

Still Freezing? What to Try Next

Back to guide

Frequently Asked Questions

Why is my computer freezing but my mouse is still moving?

Then the mouse is working, and an app or Windows has stopped responding. Press Ctrl + Shift + Esc to open Task Manager and end the app that's stuck. If it keeps happening, see Why Does My Computer Keep Freezing?

How do I unfreeze my mouse cursor?

Unplug the mouse or its USB receiver, wait about 10 seconds and plug it back in, or turn the mouse off and on. If your screen has gone black or blank, press Windows key + Ctrl + Shift + B to wake it up.

Why is my mouse suddenly unresponsive?

Sudden stops usually have a recent cause: batteries that have run down, a receiver moved to a different USB port, or a new driver. Change the batteries, put the receiver back in its usual port, or roll back the driver in Device Manager.

How can I test for mouse stuttering?

Move the pointer slowly in circles and watch for pauses or jumps, then try the same mouse on another PC. If it stutters there too, the mouse is the problem. Our free mouse test also checks every button and the scroll wheel.

Can WinZip System Utilities Suite fix a freezing mouse?

Not on its own. Its one-click scan includes Driver Updater, which finds outdated drivers, one of the causes in this guide. It can't fix weak batteries, a poor wireless signal or a worn-out mouse, so use the other checks here for those.

How This Guide Was Checked

Written by
WinZip Team, November 2026.
First published
November 20, 2026
Sources reviewed

Speed Up Your PC With WinZip System Utilities Suite

  • Clean junk files and free up disk space
  • Update outdated drivers
  • Speed up startup
  • Optimize and defrag your drives
Download Now For Windows 11 and 10