Touch Screen Test: Check Your Touchscreen and Touchpad
This free touch screen test shows every finger in its own color, so you can check multi-touch, find dead spots and see whether your touchpad responds.
Is your touchscreen working?
Also works with a touchpad, a pen or a mouse.
- Click Start Touch Test
- Draw in the dark box
- Click Show My Result
Draw here with one finger, then add more
Touchpad Scrolling and Zooming
- Scroll with two fingers: Not tried yet
- Pinch to zoom: Not tried yet
How the Test Works
Drawing Test: Touch the dark box with one finger and draw a line. Then put down a second and a third finger: each finger gets its own color and number. With a touchpad or mouse, move the pointer slowly across the box.
Dead Spot Check: Swipe your finger over every square until it turns green. To check the whole screen, click Use Full Screen. With a mouse or touchpad, hold the button down and drag. Squares you missed show in red after you click Show My Result.
Touchpad Scrolling and Zooming: Put the pointer over the dark box. Slide two fingers up and down on your touchpad, then pinch two fingers together. Each line turns green when it works. A mouse wheel also counts as scrolling.
More details
This tool runs 100% in your browser. Nothing is uploaded, saved or sent to us.
How to Use the Touch Screen Test
- Wipe the screen or touchpad with a dry microfiber cloth, and dry your hands. Dirt and moisture are the most common reasons for missed or stray touches.
- Click Start Touch Test. In the Drawing Test, touch the box with one finger, then add fingers one at a time. Each finger gets its own color and number, so this is also a multi-touch test.
- Drag slowly across the box and along the edges. Lines should be smooth, with no gaps, jumps or marks you didn't make.
- Click Dead Spot Check, then Use Full Screen, and swipe over the whole screen until every square turns green. Then click Show My Result: any squares that haven't responded show in red when you click Back to the Test.
- On a laptop touchpad, move the pointer from edge to edge, then point at the box and try a two-finger scroll and a pinch. Click Show My Result to see what the test found.
What Your Touch Screen Test Results Mean
The test runs entirely in your browser, so it shows exactly what your touchscreen or touchpad reports to the browser. Nothing is uploaded or saved. Here is how to read what you see:
| What you see | What it usually means |
|---|---|
| Nothing happens when you touch the screen, and Fingers your screen can sense (under More details in your result) shows 0 | Windows isn't reporting a touchscreen. It may be turned off in Device Manager, or its driver is missing. See "Touchscreen Not Working in Windows 11" below. |
| Most fingers at once stops below the number your screen can sense | On Windows 11, three- and four-finger touches are used for Windows gestures, so the browser may not receive them. Turn the gestures off while you test (see below). If two fingers already fail, check the driver. |
| A square in the Dead Spot Check stays dark after several swipes | A dead spot (also called a dead zone). If it is the same spot every time, and the screen still misses touches there after cleaning, it is usually the touch panel itself. |
| Lines or dots appear that you didn't draw | Ghost touches. Often dirt, moisture, a screen protector or the charger; see "Ghost Touch: Why Your Touchscreen Touches by Itself" below. |
| Your finger is in one place but the mark appears somewhere else | The touchscreen needs calibrating, or touch is mapped to the wrong display. |
| The touchpad line breaks, jumps or stops at the same spot | Usually dirt or moisture, a sensitivity setting, or the touchpad driver. |
A touchpad works like a mouse in a browser: it moves one pointer, and gestures arrive as scrolling and zooming. That is why a touchpad shows as Mouse or touchpad and counts as one finger here. To test touchpad clicks and taps, use our mouse button test.
Touchscreen Not Working in Windows 11: What to Check
- Restart your PC. Select Start > Power > Restart. A restart clears many touch problems that start after sleep.
- Install updates. Go to Settings > Windows Update > Check for updates, then open Advanced options > Optional updates and install any driver updates listed. In Windows 10: Settings > Update & Security > Windows Update.
- Turn the touchscreen off and on again. Right-click Start, select Device Manager and expand Human Interface Devices. Right-click HID-compliant touch screen, select Disable device and confirm, then right-click it again and select Enable device. If there is more than one entry, do this for each. A small down arrow on the icon means it is turned off.
- Update or roll back the driver. In Device Manager, right-click HID-compliant touch screen and select Update driver > Search automatically for drivers. If touch stopped right after an update, select Properties, open the Driver tab and select Roll Back Driver. Our guide on how to update drivers in Windows shows each step.
- Get the maker's driver. If Windows says the best driver is already installed, check your PC maker's support site for touchscreen, chipset and BIOS updates for your model.
No HID-compliant touch screen in Device Manager at all? Select View > Show hidden devices. If it still isn't there, Windows doesn't see the touch panel, which points to a missing driver, a setting in your PC's BIOS, or a hardware fault. Windows 10 uses the same Device Manager steps.
How to Calibrate a Touch Screen in Windows 11
If the marks in the test appear away from your finger, or touching one monitor moves the pointer on another, recalibrate. This works the same in Windows 11 and 10:
- Open Control Panel > Hardware and Sound > Tablet PC Settings. You can also search for Calibrate the screen for pen or touch input.
- On the Display tab, select Calibrate, choose Touch input, and tap each crosshair as it appears.
- With more than one monitor, select Setup on the same tab and tap the touchscreen when Windows asks, so touch goes to the right display.
If calibrating makes things worse, select Reset on the Display tab to go back to the factory calibration. Tablet PC Settings only appears on PCs with a touchscreen or pen.
Testing three or more fingers? In Windows 11, go to Settings > Bluetooth & devices > Touch and turn off Three- and four-finger touch gestures while you test, then turn it back on.
Ghost Touch: Why Your Touchscreen Touches by Itself
Ghost touches are taps and lines that appear when nothing is touching the screen. Work through these in order:
- Clean and dry the screen. Turn the screen off first, then wipe it with a dry microfiber cloth. Water drops and grease can register as touches.
- Check the screen protector. Bubbles, dust under the film or a peeling edge can cause stray touches. Remove it and test again.
- Unplug the charger. If the ghost touches stop on battery, try the charger that came with your device.
- Turn the touchscreen off and on in Device Manager, as described above.
If ghost touches continue after all of this, or the glass is cracked, the touch panel usually needs repair. While you wait, you can disable HID-compliant touch screen in Device Manager and use a mouse.
Touchpad or Trackpad Test Failed? Settings to Check
Most touchpad problems in the test come from a setting. In Windows 11, go to Settings > Bluetooth & devices > Touchpad. In Windows 10, the page is Settings > Devices > Touchpad. (Windows calls a laptop trackpad a touchpad.)
- Touchpad does nothing: make sure the Touchpad switch is on. Many laptops also have a key (often one of the F keys, marked with a touchpad icon) that turns the touchpad off.
- Stops when a mouse is plugged in: in Windows 11, open the drop-down next to the Touchpad switch and tick Leave touchpad on when a mouse is connected.
- Taps are missed, or your palm moves the pointer: under Taps, change Touchpad sensitivity.
- Two-finger scroll or pinch shows "Not tried yet": under Scroll & zoom, turn on Drag two fingers to scroll and Pinch to zoom.
- Pointer too slow or fast: change Cursor speed.
If the settings look right and the touchpad still fails, update or reinstall its driver in Device Manager under Human Interface Devices or Mice and other pointing devices. Our guide on fixing touchpad problems in Windows 11 and 10 walks through every step.
A touchpad that is raised, or a laptop that wobbles on a flat surface, can be a sign of a swollen battery. Stop using the laptop and contact its maker.
Is It the Hardware, a Setting or the Driver?
- Probably a setting: only gestures fail, touch stopped after you changed a setting, or the touchpad stops when a mouse is connected.
- Probably the driver: touch stopped after a Windows update, the device shows a warning symbol in Device Manager, or it is missing from Device Manager.
- Probably hardware: the same dead spot in the Dead Spot Check every time, problems that began after a drop, a crack or a spill, or ghost touches that remain after cleaning and unplugging the charger.
Many PC makers include a hardware diagnostic that can test the touchscreen or touchpad. If it fails there too, contact the maker; if it passes there but fails in Windows, the cause is in Windows or the driver.
Frequently Asked Questions
How do I test my touch screen?
Open this page on the device, click Start Touch Test and touch the dark box. Each finger draws in its own color and number. Then click Dead Spot Check, go full screen and swipe until every square turns green: any square that won't turn green is a dead spot. Click Show My Result for a plain summary.
How many touch points does my screen support?
Click Show My Result in the test and open More details: Fingers your screen can sense shows the number your device reports to the browser. Windows shows it too: go to Settings > System > About and look at Pen and touch under Device specifications. Many laptop touchscreens report 10 touch points.
How do I test my touchpad or trackpad?
Click Start Touch Test and move the pointer slowly across the dark box with your touchpad: the line should be smooth, with no gaps or jumps. Then keep the pointer over the box and try a two-finger scroll and a pinch; each turns green under Touchpad Scrolling and Zooming when it works. To check touchpad clicks and taps, use our mouse test.
How can I tell if my touchscreen is broken or it's a software problem?
Software problems usually affect the whole screen or start after an update or settings change, and they often go away after restarting, re-enabling the touchscreen in Device Manager or updating the driver. A hardware fault usually shows as the same dead spot every time, or as ghost touches that remain after cleaning, often after a drop or crack.
Why is my touchscreen touching by itself?
These ghost touches are most often caused by dirt or moisture on the glass, a damaged or badly fitted screen protector, or the charger. Clean the screen, remove the protector and test on battery. If they continue, the touch panel may be damaged.
How do I turn the touchscreen on or off in Windows 11?
Right-click Start, select Device Manager and expand Human Interface Devices. Right-click HID-compliant touch screen and select Enable device or Disable device. The same steps work in Windows 10.
Sources

Before You Go: Check Your Touchscreen Driver
Touch stopped working after a Windows update? An outdated touchscreen or touchpad driver is a common cause. WinZip System Utilities Suite checks your drivers and lets you choose which updates to install.
- Scan for touchscreen and touchpad driver updates
- Review drivers before updating
- Update drivers in a few clicks
Free ScanDownload Time: Under 1 minuteFor Windows 11 and 10
